3PDT and true bypass wiring

I found out that it was easier for beginners to make a proper true bypass wiring when they fully understand how does it work.

The 3PDT Footswitch

Before going any further, you have to understand how functions a 3PDT footswitch. The 3PDT stands for "3 poles, double throw". Here is a diagram showing the different possibilities :
SPDT DTDT footswitch schematic
Here, we can see that a simple pole, simple throw (SPST) is equivalent to a simple on-off switch; simple pole dual throw (SPDT): equivalent to a toggle switch. So basically, double throw just means that you have two positions for the switch.
A dual pole, simple throw (DPST) is equivalent to 2 SPST, DPDT: equivalent to 2 SPDT.  

From that we can easily conclude that a 3PDT is equivalent to 3 double throws at the same time. You have two position for 3 switches with 2 positions each:
 3PDT footswitch wiring
That means to say that on one position, the middle pins are connected to the ones of the top (2 is connected to 1 for instance), and in another position to the ones on the bottom of the switch.


How to use it for true bypass?

When you want to do a true bypass, you want a simple thing:
  • in one position (position 1), input and output jacks are directly connected, the signal does not goes through the circuit (bypass)
  • Position 2: input jack goes to the input of the circuit, the output of the circuit is connected to the output jack, and a beautiful shiny LED is on.
For position 2, there are 3 conditions to be filled, that is why we need a 3PDT !


True bypass wiring 
With this type of wiring, we have the two following positions: 
True bypass wiring
That is to say on and off for the guitar pedal!


If you do not want to bother to solder directly on the 3PDT (you have to be precise and it is not very practical if you want to modify it afterwards, and most of the times it does not look so good), you can directly use a small PCB to make your true bypass like a boss. You can either make it yourself (model here and here), or buy it (very cheap here).


If you liked this article, thank me by liking the facebook page!
Any questions? Suggestions? Post a comment!
Previous
Next Post »
24 Comment
avatar

Once again, another helpful guide! Thanks a lot.

Answer
avatar

You have a wonderful way of explaining things.

Answer
avatar

Really helpful! I've blindly followed plans for true bypass switches before but this really helps make sense of the layout. Thanks

Answer
This comment has been removed by a blog administrator. - Hapus
avatar

The web site is lovingly serviced and saved as much as date. So it should be, thanks for sharing this with us.
ao lop phan quang
đồng phục việt nam
http://anhngubingo.com/khoa-hoc
cái chết của Lê Hải An

Answer
avatar

Exactly what I was looking for! Thanks for posting this; had been a stumbling block for me. Graci!

Answer
avatar

Thank you for sharing excellent information. Your website is so cool. I am impressed by the details that you have on this website. It reveals how nicely you understand this subject. Bookmarked this website page, will come back for extra articles. You, my friend, ROCK! I found simply the info I already searched everywhere and simply could not come across. What a great website. Visit@:-
office.com/setup

norton.com/setup

Answer