JHS Superbolt clone PCB and the missing JFETs

Hello solderers and pedal maniacs!

Here is my last build: a JHS SuperBolt clone! As you may know, I have already did a clone of this pedal, but I have finally designed a PCB for it!

Here are some pictures:

JHS Supebolt clone 

I used a Supro logo that was laser-cut with some double tape to make the "Supro" sticker. I think it makes a really nice look!

JHS Supebolt clone

I changed the position of potentiometers and the switch (which was rather odd in my first clone). So there is: Volume, Gain, Hi/Lo Switch and the Tone knob.

Here is one gutshot:
JHS Supebolt clone gutshot

Here is the clean PCB:
JHS Supebolt clone PCB

As usual, I used top notch quality PCB with immersion gold pads. It makes the SMD soldering easier and I find the white and gold look really satisfaying as well 😃

I also designed it so it is possible to use both SMD and through-hole JFETs:

JHS Supebolt clone PCB

If you are interested, you can find the PCB here:

 Buy the PCB

The PCB was designed a bit ago, but when testing I never managed to get a good sound out of it, even after testing multiple components values... A real nightmare!

Then I finally realized why recently: my JFETs were fakes! 😱

Today, through-hole JFETs are not manufactured anymore. Most of the JFETs you find online are fake, usually restamped transistors. Indeed, most of the transistors used today are SMD and through hole transistors are somehow a relic of the past.

For some types of transistors, there are still some applications were big industrial players use them in their through hole version. Unfortunately, it is not the case for JFETs and manufacturers have seen their volume decline, hence making it economically not viable to make them anymore.

So how can we DIYer deal with that? I mean, JFETs have an amazing saturation sound that make them quite close to tubes by some aspects.

Basically, I see two options today for DIYers: using SMD JFETs if the PCB allows it, or using adaptater boards. Let's review both options!



How to solder SMD JFET transistors

This is the easiest option. You only have to learn how to solder SMD JFETs and believe me, it is not as hard as it seems.

Follow these simple steps. Equipment-wise, it is way easier if you use a fine solder tip. If you have the Hakko soldering station I recommend, this solder tip is amazing for SMD soldering.

First, place a bit of solder on the pad. Put as little solder as your can :

How to solder SMD JFET transistors

Then, place the transistors with antistatic tweezers. I use this set of antistatic tweezers that is very amazing.

Finally, solder the middle pad of the transistor quickly. Try not to heat it for too long!

How to solder SMD JFET transistors

You can finally solder the last pads of the transistor:

How to solder SMD JFET transistors

And you are done!


Using an adapter board

There are some "mini boards" that can replace through-hole JFETs with SMD.

They are very practical for boards that do not include SMD pads.

You can buy them here or if you need a large quantity of them, you can make them here directly. It is a it cheaper regarding shipping costs for Europe.

Just solder the SMD transistor like before:

JFET through hole adapter board

Then use a bent pinheader to have a weird-looking through-hole transistor :)

JFET through hole adapter board

The only problem with these "through-hole" transistors is that they do not fit into sockets. Pay attention to heat as well!

There you go, two solutions for replacing your missing through hole JFETs!



I hope this was useful to you. Post a comment for any question!

If you liked this article, thank me by liking the Coda Effects facebook page! You can also follow Coda Effects on Instagram.
Previous
Next Post »
11 Comment
avatar

It doesn't seem dificultades to solder like you had said. I will try them in my next proyects.

Answer
avatar

Really it is not! I think everyone can do it after a bit of practice

Answer
avatar

Hi Benoit, I bought a JFET loaded Black Hole PCB from you a few months ago, Dec 2018. Are those JFETS fake as well. :-(. Nearly finished building it.

Answer
avatar

Of course not! I source them directly from Mouser, a very well know component supplier based in the USA. They are genuine Fairchild semiconductors J201, no worries :)

Answer
avatar

Fakes ones mainly are through hole and come from eBay for instance (not to name a particular country...)

Answer
avatar

Hi Benoit, hope you didn't get the wrong idea, it was only because you said your SMD JFETS for testing your Superbolt clone turned out to be fake, I thought you'd got a rogue batch. :-) Wasn't suggesting you'd purposefully use them. Thanks for reassurance.

Answer
avatar

How much i can pay for this superbolt sir? ���� please send me the price alvertsk@gmail.com

Answer
This comment has been removed by the author. - Hapus
avatar

Hi, I have a question.
I bought the pcb with the preset fets of the superBolt circuit, everything works fine but when closing the gain pot the sound is cut, although the volume pot does not sound if I do not raise the gain a bit, that is, the gain must be Open for sound.
Once I raise the gain the rest works normally.
Is this normal for this circuit?
Thanks in advance and greetings.

Answer
avatar

Thanks a lot for that new idea that's really great. as I'm getting older and age my eyes are definitely not as good as they used to be and I'm thinking about super gluing the Jewelers loupe to my eye, ha! If it's not too much to ask what temperatures are you using on say your jets and also basic population of your boards. By the way they look beautiful and I definitely plan on picking up some.

Answer
avatar

That was supposed to read 'on your Jfets' not your jets.

Answer